TM-9-2350-277-20-6

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 6 OF 6

TM-9-2350-277-20-6 - Page 162 of 487

TM 9-2350-277-20-6

REPLACE OUTBACK REMOTE CABLE ASSEMBLY (M1068A3 ONLY) — Continued

0847 01

WARNING

Each Outback inverter assembly weighs 70 lbs (32kg) and may be awkward to handle. Use

correct lifting procedures, indicated lifting devices, and/or assistance from other personnel to

avoid injury. Failure to comply could result in injury to personnel and equipment damage.

NOTE

Both inverters are identical, however due to space constraints, one of the inverters must

be mounted upside down.

7.

Remove three cap screws (21), lockwashers (22), and flat washers (23) securing inverter (IN1) mount assembly (20) to

the inverter housing (19). Discard lockwashers.

8.

Slide inverter (IN1) mount assembly (20) out of housing (19) enough to access the remote cable (11) wiring connections

on side of inverter (18). Have helper assist.

084701-5

Change 5