TM-9-2350-277-20-6

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 6 OF 6

TM-9-2350-277-20-6 - Page 156 of 487

INSTALLATION

NOTE

When replacing the cascade remote harness RP1 (W15), verify the type inverter you have

(15-pin or 25-pin) and check TM 9-2350-277-24P to identify which harness to order.

1.

Install RP1 harness (7), four screws (9), and new locknuts (8) on faceplate (3). Route RP1 harness leads down through

power enclosure and behind inverter housing A2 to front face of inverters. Avoid interfering with other components in

power enclosure.

REPLACE CASCADE REMOTE HARNESS (M1068A3 ONLY) — Continued

0847 00

0847 00-

3

Change 5