TM-9-2350-277-20-6

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 6 OF 6

TM-9-2350-277-20-6 - Page 157 of 487

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

2.

Apply primer and sealing compound to threads of terminal 2 of meter M1 (4).

3.

Install safety cover (5) and nut (6) on terminal 2 of meter M1 (4).

4.

Lift faceplate (3) in place and install 10 new lockwashers (2) and screws (1).

5.

Connect red W15 cable connector (10) to inverter IN1 (11) and black W15 cable connector (10) to inverter IN2 (11).

6.

Install access cover (12) on front of inverter housing A2 (15) with 10 new lockwashers (14) and screws (13).

FOLLOW-THROUGH STEPS

END OF TASK

1.

Connect battery ground lead (WP 0338 00).

REPLACE CASCADE REMOTE HARNESS (M1068A3 ONLY) — Continued

0847 00

0847 00-

4

Change 5