TM 9-2350-277-20-6
REPLACE MSD/ICE SHUNT GUARD (M113A3 AND M1059A3 ONLY) — Continued
0868 00
2.
Remove two screws (1), washers (2), and shunt guard (3) from hull with attached wiring harness.
3.
Remove nut (4), screw (5), lockwasher (6), washer (7), clamp (8), and wiring harness (9) from shunt guard (3). Discard
lockwasher.
0868 00-2
Change 5
1.
Slide spall liners to gain access to battery box. See TM 9-2350-277-10.