TM 9-2350-277-20-6
REPLACE MSD/ICE CREW WIRING HARNESS (M577A3 AND M1068A3
ONLY) — Continued
0879 00
4.
Install harness (9) along left side of hull. Secure with seven new tie straps (10).
5.
Secure cord to battery end of harness (11). Pull cord and harness (11) through transverse beam (8) from opposite side
of carrier. Remove cord from harness (11).
6.
Position wiring harness (16) in front of guide (9) and along hull. Secure guide (9), harness (16), cable (17), and
compartment heater ground wire (11), with clamp (12), new lockwasher (15), new lockwasher (10), screw (14), and
four new tie straps (13).
0879 00-6
Change 5