TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 178 of 871

TM 9-2350-277-34

REPLACE VARIABLE SPEED DRIVE ASSEMBLY ADAPTER — Continued

0016 00

WARNING

Engine could start and injure you. Stay clear of possible moving parts.

NOTE

Ensure FUEL SHUTOFF handle is in OFF position. Engine could start during performance of

Step 6.

5.

Have helper use 1 1/2 socket and 3/4 inch drive breaker bar on cam nut (1) to prevent engine from turning over in Step 6.

6.

Loosen retainer screw (5) four complete turns. Use 3/4 inch drive breaker bar. Install puller and three 1/4-28 UNF

screws. Install three screws and washers into rear hub (6). Break loose front cone (7) from seated position. Remove

puller and three screws. Unscrew retainer screw (5), remove washer (8), and front cone (7).

0016 00-3