TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 180 of 871

TM 9-2350-277-34

REPLACE VARIABLE SPEED DRIVE ASSEMBLY ADAPTER — Continued

0016 00

WARNING

Engine could start and injure you. Stay clear of possible moving parts.

NOTE

Ensure FUEL SHUTOFF handle is in OFF position. Engine could start during performance of

Step 5.

3.

Have helper use 1 1/2 socket and 3/4 inch drive breaker bar on cam nut (1) to prevent engine from turning over in Step 5.

4.

Install rear hub (7) on engine crank shaft (8).

5.

Install front cone (9), washer (10), and screw (11). TIGHTEN SCREW TO 290-300 LB-FT (33-34 N

m) TORQUE.

6.

Install sleeve (12) on rear hub (7).

0016 00-5