TM 9-2350-277-34
REPLACE ENGINE — Continued
0015 00
68. Position spring tensioner (1) with idler arm (2) and pulley (3) on bracket (4) and install cotter pin (5) and pin (6).
69. Position idler arm (2) and install screw (7), washer (8), and new locknut (9).
70. Install two screws (10), four washers (11), two washers (12), four mounts (13), two blocks (14), two washers (15), and
two locknuts (16) on engine. TORQUE TO 100-120 LB-FT (136-163 N·m).
0015 00-37
Change 2