TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 163 of 871

TM 9-2350-277-34

REPLACE ENGINE — Continued

0015 00

32. Install circuit leads 74D (18), 74C (19), and 74A (20) to solenoid battery terminals (21) and (22) and starter (23) with

three nuts (24) and new lockwashers (25).

33. Install bracket (1) with screw (2) and washer (3) on engine. TIGHTEN SCREW TO 30-35 LB-FT (41-48 N·m)

TORQUE.

34. Position oil sample valve (4) on bracket (5) and secure with jam nut (6).

35. Install elbow (7) and nipple (8) on engine.

36. Install low oil pressure switch (9), tee (10) and two adapters (11) and (12) on elbow (7).

37. Install clamp (13) on low oil pressure switch (9) and secure to bracket (1) with two washers (14), nut (15), and screw (16).

38. Connect hose (17) to adapter (18) on oil sample valve (4) and to adapter (12) on tee (10).

39. Install elbow (8) on primary fuel filter (9).

0015 00-30

Change 2