TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 154 of 871

TM 9-2350-277-34

REPLACE ENGINE — Continued

0015 00

INSTALLATION

WARNING

Hydraulic fluid is poisonous and can be absorbed through your skin. Wash off any hydraulic

fluid which contacts your skin. Read the hydraulic fluid warning in the front of this manual.

1.

Install new hydraulic pump (6) and new gasket (7) on engine adapter. Secure with two screws (8) and washers (9).

TIGHTEN SCREWS TO 25-30 LB-FT (34-41 N·m).

2.

Remove new engine from shipping container and place new engine on engine and transmission stand. Use sling and

lifting device.

3.

Place and secure old engine in shipping container.

CAUTION

Damage to engine will result if crankshaft endplay is not complied with. Engines require a

crankshaft endplay of not less than 0.004 inch (0.102 mm) nor more than 0.016 inch (0.406 mm)

with new parts or 0.018 inch (0

.457mm)withusedparts

.

NOTE

The crankshaft endplay inspection must be completed without the transmission or front

crankshaft pulley installed.

4.

Measure crankshaft endplay.

0015 00-21

Change 2