TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 160 of 871

TM 9-2350-277-34

REPLACE ENGINE — Continued

0015 00

22. Connect ramp to tank hose (13) to elbow (14) on hydraulic tank (4).

23. Secure two hoses (11) and (13) with four new straps (15).

NOTE

Do not tighten generator mounting bracket screws until all the mounting screws have been

installed. All three screws require a specific torque.

24. Position generator mounting bracket (16) and install washer (17) and screw (18). TORQUE SCREW TO 32-34 LB-FT

(43-46 N·m).

25. Align generator mounting bracket (16) holes. Install washer (19) and screw (20). TORQUE SCREW TO 36-38 LB-FT

(49-52 N·m).

26. Align generator mounting bracket (16) holes. Install washer (21) and screw (22). TORQUE SCREW TO 32-34 LB-FT

(43-46 N·m).

0015 00-27

Change 2