TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 259 of 871

TM 9-2350-277-34

REPLACE FRONT MAIN WIRING HARNESS — Continued

0030 00

20. Connect connector (19) to dimmer switch (20).

21. Install cover (21) on harness (22). Route harness through cover opening (23) into power plant compartment. Secure

cover on driver’s compartment bulkhead with four screws (24) and new locknuts (25). Have helper assist.

22. Slide mount plate (1) between two lower lockwashers (2), two upper lockwashers (3), and screws (4) of voltage regulator

(5).

23. Slide two new lockwashers (6), under front mount plate (1) on hull weld nuts. Place two new lockwashers (7) on mount

plate (1) over holes. Secure with two screws (8).

24. Tighten two rear screws (4).

0030 00-26

Change 5