TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 255 of 871

TM 9-2350-277-34

REPLACE FRONT MAIN WIRING HARNESS — Continued

0030 00

NOTE

Two lead bushings are installed the same way Steps 5 - 6.

5.

Install bushing (28) into left bushing hole on front upper nose plate of hull. Secure with washer (26), new lockwasher

(25), and nut (24) (from inside of hull), two washers (26) and (27), new lockwasher (25), and nut (24) (from outside of

hull). Have helper assist.

6.

Route circuit 17, 18, and 20 leads (6) out through bushing. Install rubber bushing (7), retainer pack (8), spring washer (9)

on bushing. Secure with coupling nut (10). Have helper assist.

0030 00-22

Change 5