TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 303 of 871

TM 9-2350-277-34

REPAIR TRACK TENSION ADJUSTER — Continued

0037 00

3.

Pull plunger (2) from piston (3).

4.

Remove retaining ring (4), wiper ring (5), and packing (6) from piston (3). Discard retaining ring, wiper ring,

and packing.

5.

Press bearing (7) about 1 inch (3 cm) in piston (3) to force retaining ring (8) from groove in piston.

6.

Pull bearing (7) from piston (3). Discard bearing.

7.

Turn retaining ring (8) 90 degrees in piston (3). Remove ring from piston. Discard ring.

8.

Close bleeder valve (1). Force grease through lubrication ﬁtting (9) until piston assembly (10) is forced from piston (3).

9.

Use a clean cloth to remove excess grease from piston assembly (10) and piston (3).

0037 00-2