TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

  TM-9-2350-277-34 - Page 306 of 871

TM 9-2350-277-34
REPAIR TRACK TENSION ADJUSTER — Continued
0037 00
INSTALLATION
1.
Press new sleeve bearing (14) in piston (3) from side opposite lubrication fitting (9). Use arbor press.
2.
Press new sleeve bearing (15) in plunger (2). Use arbor press.
NOTE
Packings, bearings, and retaining rings are part of repair kit P/N 5703829.
3.
Install five new packings (13), new bearing (12), and new retaining ring (11) on piston assembly (10).
4.
Apply a light coat of engine oil to piston assembly (10) and to inside of piston (3).
0037 00-5


Back to Top