TM 9-2350-277-34
REPAIR TRACK TENSION ADJUSTER — Continued
0037 00
5.
Install piston assembly (10) in piston (3).
6.
Install new retaining ring (8) in piston (3). Make sure it seats in groove.
7.
Install new bearing (7) in piston (3).
8.
Install new packing (6), new wiper ring (5), and new retaining ring (4) in piston (3).
9.
Install plunger (2) in piston (3). Maintain inward pressure on plunger and rotate clockwise until secure.
10. Install bleeder valve (1) and lubrication fitting (9) in piston (3).
0037 00-6