TM 9-2350-277-34
REPAIR COMMANDER’S CUPOLA (M113A3, M1059A3, M1064A3, AND
M58 ONLY) — Continued
0051 00
REMOVAL
WARNING
Commander’s hatch cover may spring up and injure you. Open hatch cover and support
in vertical position.
1.
Remove two locknuts (1), washers (2), screws (3), and retainer (4) from cupola bracket (5). Discard locknuts.
2.
Support cover (6). Remove 12 springs (7), shield (8), two fiber washers (9), and cover from cupola.
3.
Remove locknut (10) and screw (11) from cover (6). Discard locknut.
4.
Pry up end of seal (12) and remove from cover (6). Discard seal.
0051 00-2
Change 2