TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 368 of 871

TM 9-2350-277-34

REPAIR COMMANDER’S CUPOLA (M113A3, M1059A3, M1064A3, AND

M58 ONLY) — Continued

0051 00

3.

Install 140 ball bearings (5), 146 separators (6), and six bearing blocks (7) in groove of inner race (8).

NOTE

The outer race and inner race must be aligned correctly so that the traverse lock pin will fit.

4.

Install outer race (3) on hatch (4). Place large unthreaded hole in outer race directly above largest unthreaded hole in

inner race (8).

5.

Secure outer race (3) to inner race (8) with 18 new lockwashers (2) and socket head screws (1). TIGHTEN SCREWS

TO 25 TO 34 LB-FT (34 TO 46 N·m) TORQUE.

0051 00-11

Change 2