TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 373 of 871

TM 9-2350-277-34

REPAIR COMMANDER’S CUPOLA (M113A3, M1059A3, M1064A3, AND

M58 ONLY) — Continued

0051 00

18. Place machine gun mount (18) on commander’s cupola. Secure with four washers (17) and screws (16).

NOTE

Install washer(s), as needed, to compress bumper 1/4 inch (6 mm) when hold-open hook is

engaged.

19. Install washer(s) (15) and bumper (14) in cupola bracket. secure with washer (13) and nut (12).

20. Align hook (10), two spacers (9), spring (8) and two washers (7) with cupola bracket. Secure with screw (11) and

locknut (6).

21. Install hook (4) in safety pin (5) and chain (2). Squeeze both ends of hook to secure.

0051 00-16

Change 2