TM 9-2350-277-34
REPAIR COMMANDER’S CUPOLA (M113A3, M1059A3, M1064A3, AND
M58 ONLY) — Continued
0051 00
29. Align striker (17) with holes in cupola cover. Secure with two washers (16) and screws (15).
30. Place shim(s) (14) and support (11) on hull. Secure with two washers (13) and screws (12). Do not torque screws
at this time.
31. Align catch (10) and spring (9) with support (11). Secure with headed pin (8) and new cotter pin (7).
0051 00-18
Change 2