TM 9-2350-277-34
REPAIR COMMANDER’S CUPOLA (M113A3, M1059A3, M1064A3, AND
M58 ONLY) — Continued
0051 00
NOTE
Commander’s cupola cover should latch tightly with firm latching action.
32. To increase pressure of catch (10) on striker (17), add shim(s) (14), as needed, between support (11) and hull.
33. To decrease pressure of catch (10) on striker (17), remove shim(s) (14), as needed, from between support (11) and hull.
34. TIGHTEN TWO SCREWS (12) TO 25-30 LB-FT (34-41 N·m) TORQUE.
END OF TASK
0051 00-19/20 blank
Change 2