TM 9-2350-277-34
REPAIR RAMP ACCESS DOOR (ALL EXCEPT M113A3)
0059 00
THIS WORK PACKAGE COVERS:
Removal (page 0059 00-1).
Installation (page 0059 00-2).
INITIAL SETUP:
Maintenance Level
Direct Support
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0120 00, Item 62)
Lifting device with rated lift capability of at least 200 lbs
(91 kg)
Personnel Required
Track Vehicle Repairer 63H10
Helper (H)
References
See your -10
See your -20
Equipment Condition
Ramp raised and locked (see your -10)
Engine stopped/shutdown (see your -10)
Carrier blocked (see your -10)
REMOVAL
WARNING
Door could fall and injure you. Make sure door is held by a lifting device before removing hinge
screws.
1.
Attach door to lifting device.
2.
Remove two nuts (1), screws (2), and spacers (3) that secure ramp door (4) to four hinge parts (5) on ramp (6). Remove
door from ramp. Have helper assist.
3.
Remove two shoulder bushings (7) from two hinges (8) on ramp door (4).
0059 00-1