TM-9-2350-277-34
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
TM-9-2350-277-34 - Page 435 of 871
TM 9-2350-277-34
REPLACE RAMP HYDRAULIC CYLINDER ANCHOR (M1064A3 ONLY) — Continued
0065 00
6.
Secure anchor (1) with one new washer (2) and one new screw (3).
7.
Use new anchor (1) as template. Locate center of remaining two holes. Remove anchor. Drill and tap holes same way as
first hole Step 3 and Step 4.
8.
Clean surface with wire brush.
9.
Paint any exposed metal surfaces. See TM 43-0139.
0065 00-4
Change 1
Back to Top
