TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 522 of 871

TM 9-2350-277-34

INSTALL ENGINE COOLANT HEATER KIT (M113A3 AND M1059A3)

0075 00

THIS WORK PACKAGE COVERS:

Installation (page 0075 00- 1).

INITIAL SETUP:

Maintenance Level

Direct Support

Tools and Special Tools

Automotive Fuel and Electrical System Repair Tool Kit

(WP 0120 00, Item 59)

Materials/Parts

Adhesive (WP 0122 00, Item 1)

Cleaning Compound (WP 0122 00, Item 8)

Sealing Compound (WP 0122 00, Item 27)

Kit P/N 12349820

Tie Strap (2)

Personnel Required

Track Vehicle Repairer 63H10

References

TM 9-2350-277-10

TM 9-2350-277-20

Equipment Condition

Carrier blocked (TM 9-2350-277-10)

Battery ground lead disconnected (TM 9-2350-277-20)

Driver’s power plant access panel removed

(TM 9-2350-277-20)

Power plant rear access panel removed

(TM 9-2350-277-20)

Power plant front access door opened

(TM 9-2350-277-10)

Driver’s compartment floor plates removed

(TM 9-2350-277-20)

Rear and right front floor plates removed

(TM 9-2350-277-20)

Power plant grille raised (TM 9-2350-277-20)

Carrier cooling system drained (TM 9-2350-277-20)

Personnel heater kit installed (WP 0072 00 or

WP 0073 00)

Power plant removed (TM 9-2350-277-20)

INSTALLATION

NOTE

Fuel hoses used on the engine coolant heater installation are the flareless type. If it is necessary

to replace hose, the connection fittings must also be replaced.

007500-1

Change 5