TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 531 of 871

TM 9-2350-277-34

INSTALL ENGINE COOLANT HEATER KIT (M113A3 AND M1059A3) — Continued

0075 00

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

41. Apply sealing compound to external tapered threads of elbow (24). Do not apply sealing compound beyond small end

of tapered threads.

42. Install elbow (24) and jam nut (25) on bulkhead.

43. Route supply hose (26) through hull openings.

44. Install seven clamps (27) on supply hose (26) with seven screws (28).

45. Connect supply hose (26) to elbow (24).

0075 00-10

Change 5