TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 535 of 871

TM 9-2350-277-34

INSTALL ENGINE COOLANT HEATER KIT (M113A3 AND M1059A3) — Continued

0075 00

62. Route hoses (8) and (9) along sponson to elbows (5) in floor plate.

63. Install one clamp (10) on each hose (8) and (9). Connect hoses to elbows (5) and secure with clamps (10).

64. Install one clamp (11) on each hose (8) and (9) and secure to seat bracket (12) with two screws (13), washers (14),

and nuts (15).

NOTE

Do not kink hoses.

65. Install clamp (16) on hoses (8) and (9) and secure to weldnut (17) with screw (18) and washer (19).

66. Install batteries and retainers. See TM 9-2350-277-20.

67. Install one clamp (20) each on second coolant pump hose (21) and second engine hose (22). Connect hoses to elbows (5)

under driver’s floor plate. Tighten clamps.

0075 00-14

Change 5