TM 9-2350-277-34
INSTALL ENGINE COOLANT HEATER KIT (M113A3 AND M1059A3) — Continued
0075 00
91. Install wiring harness (2) on mounting bracket. Secure with screw (8) and clamp (9).
92. Install wiring harness (2) on two weldnuts (10). Secure with two clamps (11) and screws (12).
93. Remove three screws (13) and clamps (14) that secure fuel control cable (15) to three weldnuts (16).
94. Install wiring harness (2) and fuel control cable (15) on three weldnuts (16). Secure with three screws (13), clamps
(14), and clamps (17).
0075 00-23
Change 5