TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 548 of 871

TM 9-2350-277-34

INSTALL ENGINE COOLANT HEATER KIT (M113A3 AND M1059A3) — Continued

0075 00

106. Open fuel tank shutoff valves (1).

FOLLOW-THROUGH STEPS

1.

Lower power plant grille. See TM 9-2350-277-20.

2.

Fill carrier cooling system. See TM 9-2350-277-20.

3.

Connect battery ground lead. See TM 9-2350-277-20.

4.

Bleed coolant heater fuel line. See TM 9-2350-277-20.

5.

Start coolant heater. See TM 9-2350-277-10. Check that heater works right and does not leak. Turn coolant heater off.

6.

Install rear and right front floor plates. See TM 9-2350-277-20.

7.

Install driver’s compartment floor plates. See TM 9-2350-277-20.

8.

Install driver’s power plant access panel. See TM 9-2350-277-20.

9.

Install power plant rear access panel. See TM 9-2350-277-20.

10. Close power plant front access door. See TM 9-2350-277-20.

END OF TASK

0075 00-27/28 blank

Change 5