TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 538 of 871

TM 9-2350-277-34

INSTALL ENGINE COOLANT HEATER KIT (M113A3 AND M1059A3) — Continued

0075 00

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

72. Apply sealing compound to external threads of elbow (8) and drain cock (9). Do not apply sealing compound beyond

small end of tapered threads.

73. Install new gasket (10) and fitting (11) on engine block and secure with two screws (12) and washers (13).

74. Install elbow (8) and drain cock (9) on fitting (11).

0075 00-17

Change 5