TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 762 of 871

TM 9-2350-277-34

REPLACE CABLE ASSEMBLY W115 (M1068A3 ONLY) — Continued

0107 00

INSTALLATION

1.

Install cable assembly W115 into vehicle, and route cable up through base (15) into external communications box (2).

Have helper assist.

2.

Connect cable assembly W115, plug P106 (12) to jack J136 (13) on signal patch panel box (14).

3.

Install clamps (9) on cable assembly and secure to weldnuts (10) with screws (8), as required.

4.

Install new straps (11) to secure cable W115, as required.

5.

Connect 16 leads (7) to binding post (6) on faceplate (5).

6.

Install faceplate (5) on external communication box (2) and secure with 14 new lockwashers (4) and screws (3).

7.

Close and secure lid (1) on external communication box (2).

FOLLOW-THROUGH STEPS

1.

Install external communication box (see your -20)

END OF TASK

0107 00-3/4 blank