TM 9-2350-311-10
2–1 2 PREPARATION FOR FIRING — CONTINUED
2-12.5
Loading the 155MM Cannon — Continued
b. Power Ramming — Continued
•
Never load a propelling charge into propellant chamber by increments. Only fully assembled
charges will be used. Critical malfunction could result causing injury to personnel.
•
Do not assemble M3 series green bag propelling charges with M4 series white bag
propelling charges. Critical malfunction could result causing injury to personnel.
•
When inserting propelling charge, check that igniter (red) end is towards breechblock. If
propelling charge is not properly loaded, a misfire may result causing injury to personnel.
NOTE
Don’t put propelling charge in until just before firing. Temperature variation will affect
performance of propelling charge.
9 Cannoneer no. 1 receives propelling charge (17) from HD, loads propelling charge into propellant
chamber with igniter (red) end toward breechblock (2) so that it is 3 inches (7.62 cm) inside rear of
propellant chamber or in groove in propellant chamber, and announces,”1 SEE RED.”
2-209