TM 9-2350-311-10
3-6 ARMAMENT AND CAB MAINTENANCE — CONTINUED
3-6.8
Breech Mechanism —Continued
b. inspection of Spindle Assembly Components
1 Inspect obturator pad (36) for evidence of leakage past sealing surfaces. Replace obturator pad if sliced,
cracked, chipped, or damaged.
2 Inspect retaining rings (34 and 37) for deformed shape as determined by the following.
(a) Maximum allowable circular spread for front retaining ring (37) is 3/8 inch (9.5 mm). The maximum
allowable circular spread for the rear retaining ring (34) is 1/8 inch (3.2 mm).
3-68