TM 9-2350-311-20-1
For M109A3 personnel heaters, a clamp at rear of heater also may have to be
installed in order to install heater.
1 Install lower duct (14), personnel heater (13), four new Iockwashers (12), and four screws (11).
2 Install two clamps (10).
3 Install flange (8), clamp (6), and sleeve (7) to connect exhaust tube (9).
4 Install outlet hose (5) and tighten clamp (4). Torque screw to 90-95 ib-in. (10.2-10.7 N-m).
5 Connect fuel line (3) and install nut (2).
6 Connect electrical connector (1).
11-67