TM-9-2350-311-20-1
HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A2, M109A3, M109A4 AND M109A5
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL FOR HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS
AUGUST 1994
TM-9-2350-311-20-1 - Page 1041 of 1275
TM 9-2350-311 -20-1
SECTION IV. BILGE PUMP, PERSONNEL HEATER, PERSONNEL AIR VENTILATION
SYSTEM, AND FIXED FIRE EXTINGUISHER SYSTEM
11-18 BILGE PUMP
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
General mechanic’s tool kit (item 64, Appx H)
Powerplant removed (para 4-5)
a. Removal
1 Disconnect electrical connector (1).
2 Remove two clamps (2 and 3) and hose (4).
3 Remove three mount screws (5).
4 Remove bilge pump (6).
b. Installation
1 Install bilge pump (6) and three mount
2 Install hose (4) and two clamps (2 and
3 Connect electrical connector (1).
screws
3).
(5).
11-62
Back to Top
