11-16 FENDERS
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
General mechanic’s tool kit (item 64, Appx H)
Cotter pins (2) (item 45, Appx G)
Snap ring pliers (item 41, Appx H)
a. Removal
NOTE
Left and right fenders are removed using same procedure.
1 Remove three screws (1), front fender (2), and retainer (3).
2 Remove two cotter pins (4), straight pin (5), two washers (6), spring (7), and rear fender (8). Discard cotter
pins.
b. Installation
NOTE
Left and right fenders are installed using same procedure.
1 Install rear fender (8), spring (7), two washers (6), straight pin (5), and two new cotter pins (4).
2 Install front fender (2), retainer (3), and three screws (1).
11-60
TM 9-2350-311-20-1