TM-9-2350-311-20-1

HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A2, M109A3, M109A4 AND M109A5

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL FOR HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS

AUGUST 1994

TM-9-2350-311-20-1 - Page 1091 of 1275

TM 9-2350-311-20-1

13-6 FLASHLIGHT HOLDER AND CLGP EXTRACTOR

This task covers:

a. Removal

b. Installation

Tools

General mechanic’s tool kit (item 64, Appx H)

Cotter pins (2) (item 40, Appx G)

Lockwashers (2) (item 192, Appx G)

a. Removal

NOTE

Step 1 applies to flashlight holder.

1 Remove two screws (1), two Iockwashers (2), and flashlight holder (3). Discard Iockwashers.

NOTE

Step 2 applies to CLGP tactical extractor.

2 Remove two screws (4), two washers (5), two cotter pins (6), two headed pins (7), four washers (8), two

clamps (9), and CLGP extractor (1 O). Discard cotter pins.

b. Installation

NOTE

Step 1 applies to CLGP tactical extractor.

1 Install CLGP extractor (10), two clamps (9), four washers (8), two headed pins (7), two new cotter pins (6), two

washers (5), and two screws (4).

NOTE

Step 2 applies to flashlight holder.

2 Install flashlight holder (3), two new Iockwashers (2), and two screws (1).

13-12

Materials/Parts