TM-9-2350-311-20-1

HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A2, M109A3, M109A4 AND M109A5

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL FOR HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS

AUGUST 1994

TM-9-2350-311-20-1 - Page 924 of 1275

TM 9-2350-311-20-1

2 Install end connector puller. Tighten two screws (4) against ends of track link pins (5).

3 Tighten two screws (4) until end connector (3) moves out approximately 1 in. (25.4 mm). Repeat for remaining

three end connectors.

NOTE

Tighten both fixtures equally removing tension from shoe or track connectors being

removed.

4 Install track-connecting fixtures on both ends of shoe being removed, engaging track link pins (5) on adjacent

shoes. Hold ends of track until shoe is replaced.

5 Remove four end connectors (3), end connector puller with screws (4), and track shoe (6).

10-7