TM 9–2350–311–20–2
15–15
a.
Removal
1
Remove two machine bolts (1), stowage bracket (2), two flat washers (3), and two hex nuts (4) from multiple
bracket (5).
2
Remove two cap screws (6) and four flat washers (7). This will release multiple bracket (5) from
M145/M145A1 telescope mount.
b.
Installation
1
Position multiple bracket (5) on M145/M145A1 telescope mount and install four flat washers (7) and two cap
screws (6).
2
Install two hex nuts (4), two flat washers (3), stowage bracket (2), and two machine bolts (1) into multiple
bracket (5).
7
6
1
2
5
3
4