TM-9-2350-311-34-2

CAB, ARMAMENT, SIGHTING AND FIRE CONTROL, ELEVATING AND TRAVERSING SYSTEMS AND ASSOCIATED COMPONENTS HOWITZER, MEDIUM, SELF-PROPELLED, 155MM

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE MANUAL

SEPTEMBER 1994

TM-9-2350-311-34-2 - Page 213 of 552

TM 9-2350-311-34-2

7

Install two new seal assemblies (54) on two headed grooved pins (55).

Adhesives can burn easily, can give off harmful vapors, and are harmful to skin and clothing. To

avoid injury or death, keep away from open fire and use in well-ventilated area. If adhesive gets on

skin or clothing, wash immediately with soap and water.

8

Split new piston wiper (53) diagonally 3/4 inch (19.05 mm) front to rear and cement in place on outer cylin-

der head (44) using adhesive.

9

Install new seal assemblies (52, 51, 50, and 49) on outer cylinder head (44).

10

Install new seal assemblies (48 and 47) on inner cylinder head (43).

5-69