TM 9-2350-311-34-2
5-11 RECUPERATOR ASSEMBLY — CONTINUED
b. Disassembly
1
To disassemble cover adapter group (6) remove two spring pins (29) from two cap screws (30). Discard spring
pins.
2
Remove two cap screws (30), cover (31), and gasket (32) from cover adapter (33). Discard gasket.
3
Remove safety relief valve (34) from cover (31).
4
Remove cotter pin (35), slotted nut (36), flat washer (37), piston group (19), and retaining ring (38) from
shouldered shaft (12). Discard cotter pin and retaining ring.
5-60
Change 2