TM-9-2350-311-34-2
CAB, ARMAMENT, SIGHTING AND FIRE CONTROL, ELEVATING AND TRAVERSING SYSTEMS AND ASSOCIATED COMPONENTS HOWITZER, MEDIUM, SELF-PROPELLED, 155MM
TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE MANUAL
SEPTEMBER 1994
TM-9-2350-311-34-2 - Page 202 of 552
TM 9-2350-311-34-2
5-11 RECUPERATOR ASSEMBLY — CONTINUED
a. Removal — Continued
17
Remove lockwire (21) from pneumatic valve (3). Remove pneumatic valve. Discard lockwire and preformed
packing.
Block cannon assembly with fabricated breech stand when working on mount components with
cannon assembly pushed out of battery. This will prevent serious injury to personnel or damage to
equipment caused by accidental elevation of the cannon assembly.
18
Push cannon assembly out of battery 37-1/2 inches (95.25 mm) (TM 9-2350-311-20-2).
19
Retract rammer assembly (22) and swing cylinder down for clearance (TM 9-2350-311-10).
5-58 Change 2
Back to Top
