TM-9-2350-311-34-2

CAB, ARMAMENT, SIGHTING AND FIRE CONTROL, ELEVATING AND TRAVERSING SYSTEMS AND ASSOCIATED COMPONENTS HOWITZER, MEDIUM, SELF-PROPELLED, 155MM

TECHNICAL MANUAL; DIRECT AND GENERAL SUPPORT MAINTENANCE MANUAL

SEPTEMBER 1994
TM-9-2350-311-34-2

  TM-9-2350-311-34-2 - Page 225 of 552

5-81
TM 9-2350-311-34-2
16
Install sector gear (8), flat washer (13), and cap screw (11) to provide leverage.
Use gloves or rags to grip inner orifice. Edge of inner orifice is extremely sharp and could cause injury.
17
Place drain pan under variable recoil cylinder (3) to catch hydraulic fluid while withdrawing inner orifice and front
follower group (25). Using a prybar, pry inner orifice and front follower group out of variable recoil cylinder.
18
Remove cap screw (11), flat washer (13), and sector gear (8) from inner orifice and front follower group (25).


Back to Top