TM-9-2350-358-BD

HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A6

TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT SUPPORT MAINTENANCE

MARCH 1994

TM-9-2350-358-BD - Page 148 of 343

TM 9-2350-358-BD

6-9.

RADIATOR LEAKING - CONTINUED

Option 2:

Tubing to Hose Joint, Leak.

Limitations:

None

Personnel/Time Required:

•

1 soldier

•

1.0-4.0 hours

Materials/Tools:

•

Wire brush (found in M2/3 generic BDR kit, Section III, Appendix C)

•

Solvent, drycleaning (item 59, Appendix C)

•

Epoxy, adhesive (item 2, Appendix C)

•

Suitable container (scavenge from available source)

References:

•

TM 9-2350-314-10

•

TM 9-2350-314-20-1-1

Procedural Steps:

1.

Gain access to radiator.

2.

Inspect the radiator and pinpoint the leak location.

3.

Drain the coolant.

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can

give off harmful vapors, and are harmful to skin and clothing.

To

avoid injury or death, keep away from open fire and use it in well-

ventilated area.

If adhesive, solvent, or sealing compound gets on

skin or clothing, wash immediately with soap and water.

4.

Clean the leak area with solvent or available cleaner.

6-10