TM-9-2350-358-BD

HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A6

TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT SUPPORT MAINTENANCE

MARCH 1994

  TM-9-2350-358-BD - Page 202 of 343

TM 9-2350-358-BD
10-5.
ROADWHEEL ARM, DAMAGED - CONTINUED
6.
Reconnect track if disconnected.
7
Record the BDAR action taken.
When mission is complete, as soon as practical, repair the equipment/system
using standard maintenance procedures.
10-6.
ROADWHEEL ARM HUB, DAMAGED
General Information:
The roadwheel hub must be serviceable to use single or double roadwheels (reference para 1-8).
If the hub or spindle is
damaged and interferes with track operation it must be removed or tied up (reference para 10-5).
This procedure lists
three options to fix a damaged roadwheel hub depending on materials available.
Option 1:
Limitations:
Repair may loosen and leak due to improper cleaning of damaged area.
Personnel/Time Required:
1 soldier
0.5 hour
Materials/Tools:
Polymer kit (found in M2/3 generic BDR kit, Section III, Appendix C)
Grease (item 34, Appendix C)
References:
LO 9-2350-314-12
Procedural Steps:
10-4


Back to Top