TM 9-2350-358-BD
9-5.
BRAKES, PARKING, LOCKED - CONTINUED
Personnel/Time Required:
•
1 soldier
•
0.2 hour
References:
TM 9-2350-314-20-1-2
Other Options:
Disconnect linkage at transmission
Procedural Steps:
WARNING
Tracks must be blocked so that the vehicle will not roll out of control when the brake linkage is
disconnected.
Failure to block tracks may result in severe injury to personnel or equipment
damage.
1.
Locate parking brake handle directly beneath steering wheel in driver's compartment.
2.
Remove parking brake bracket from frame by removing the two bolts.
3.
Lay parking brake assembly on floor.
4.
Record the BDAR action taken.
When mission is complete, as soon as practical, repair the equipment/system
using standard maintenance procedures.
9-6.
BRAKES, SERVICE, LOCKED
General Information:
Brakes will not release.
Limitations:
Possible that brakes will lock again.
9-3