TM-9-2350-358-BD

HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A6

TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT SUPPORT MAINTENANCE

MARCH 1994

  TM-9-2350-358-BD - Page 185 of 343

TM 9-2350-358-BD
8-6.
TRANSMISSION FAILURE - CONTINUED
Procedural Steps:
1.
Replace transmission.
2.
Record the BDAR action taken.
When mission is complete, as soon as practical, repair the equipment/system
using standard maintenance procedures.
SECTION IV.
TRANSFER ASSEMBLY
8-7.
GENERAL
Transfer assemblies are interchangeable within the same families of vehicles.
Some transfers also drive other
accessories such as hydraulic pumps, cooling fans, or power take-offs.
Care must be taken to use a transfer case which
will provide the minimum essential operations required for the vehicle’s mission.
BDAR procedures may consist of
cannibalizing complete assemblies from vehicles within the family, or parts exchange to repair one from other defective
units.
8-8.
TRANSFER ASSEMBLY INTERCHANGEABILITY
General Information:
Transfer Assemblies are interchangeable between the following vehicles: M107, M108, M109 Series, M110, M110A1,
M110A2, M578, and M992.
Limitations:
Some transfer assemblies may reduce vehicle mobility.
Personnel/Time Required:
3 soldiers
1.5 hours
Materials/Tools:
Transfer (scavenged from available source)
Oil to refill transfer
References:
LO 9-2350-314-12
TM 9-2350-314-34-1
Other Options:
Replace transfer assembly with substitute.
8-5


Back to Top