TM-9-2350-358-BD
HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A6
TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT SUPPORT MAINTENANCE
MARCH 1994
TM-9-2350-358-BD - Page 28 of 343
TM 9-2350-358-BD
2-5.
ASSESSMENT PROCEDURE - CONTINUED
(2)
Hull and Cab Damage Assessment and Repair address specific systems and subsystems.
These
forms are designed to assist the assessor to rapidly determine the appropriate BDAR fix.
The
portion of this which addresses parts should be filled out only when the tactical situation permits.
Where possible these forms should follow the damaged equipment or be sent to the rear as a
record of what damage occurred and what repairs were effected and where.
SECTION II.
GENERAL FAULT ASSESSMENT TABLES AND
BATTLE DAMAGE ASSESSMENT/REPAIR FORMS
NOTE
Subsystem, and components assessed through this assessment
process must work to provide minimum functional combat
capability (para 1-8).
Even if all systems work, the vehicle may be
unsafe and may not satisfy normal required operating capabilities
or may not receive mission-essential maintenance.
Table 2-1. Visual Inspection
ITEM/ACTION
FAULT ISOLATION
BDAR REFERENCE
Engine
Visually inspect
Damage visible:
-Evaluate extent of damage
using procedure in.
.....................................
Chapter 4,
Table 4-1.
No damage found
Fuel System
Visually inspect
Damage visible:
-Evaluate extent of damage
using procedure in .
....................................
Chapter 5,
Table 5-1.
No damage found
2-5
Back to Top
