TM-9-2510-247-13-P

FIFTH WHEEL TOWING DEVICE MODEL 250M

TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL, REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2004

TM-9-2510-247-13-P - Page 340 of 522

TM 9-2510-247-13&P

0077 00

REMOVAL - Continued

1. With towing device coupled to prime mover, BOOM RETRACT to upright position.

2. Remove eight screws (1) from winch bracket (2).

3. BOOM EXTEND to lower boom to ground.

4. Relieve hydraulic pressure (WP 0056 00-5).

CAUTION

To prevent contamination of hydraulic system, cap and/or plug

hydraulic lines and ports after disconnecting lines.

NOTE

Mark hydraulic hoses prior to disconnecting.

5. Disconnect both winch hydraulic hoses.

6. Remove two elbows (3) from winch motor (4).

7. Remove four screws (5) from winch bracket (2) and winch assembly (6).

8. Lift winch assembly (6) from bracket (2).

0077 00-2

Figure 128.

Winch Assembly