TM-9-2510-247-13-P

FIFTH WHEEL TOWING DEVICE MODEL 250M

TECHNICAL MANUAL; OPERATOR’S, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL, REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2004

TM-9-2510-247-13-P - Page 342 of 522

TM 9-2510-247-13&P

0077 00

CABLE ASSEMBLY REMOVAL - Continued

1.

If winch can be operated, play out winch cable (1). If winch cannot be operated to play out

winch cable, cut cable (1) close to hex screw (2).

NOTE

Cable drum can be set up for clockwise or counterclockwise installation of

winch cable. To aid in installation, make note of cable anchor slot used to

secure cable on winch drum.

2.

Remove hex screw (2) and winch cable (1). Remove cable (1) from around hex screw (2), and

pull cable (1) from winch (3).

CABLE ASSEMBLY INSTALLATION

1.

Install cable (1) through cable anchor slot and around hex screw (2). Firmly seat hex

screw (2) in cable anchor slot of winch (3).

2.

Reel in winch cable.

Figure 129.

Cable Assembly

Follow-on Tasks:

•

Test hydraulic system for leaks (WP 0056 00-5).

•

Check hydraulic fluid level (WP 0056 00-5).

•

Check winch for proper operation (WP 0013).

0077 00-4