TM-9-2520-238-34

M113A1 FOV, M113A2 FOV, M548 AND M548A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL; RIGHT ANGLE DRIVE, COOLING FAN; GEARCASE, TRANSFER; DRIVE ASSEMBLY, FINAL; DIFFERENTIAL, STEERING CONTROL; BRAKE, SINGLE DISK; CYLINDER ASSEMBLY, HYDRAULIC BRAKE

TM-9-2520-238-34 - Page 152 of 319

TM 9-2520-238-34

REPAIR TRANSFER GEARCASE F — Continued

0019 00

17. Secure disk assembly (3) to output gear with gearcase washer assembly (6), new key washer (7), and cap screw (8).

Tighten screw to 30-35 lb-ft (41-46 N.m) torque. Use torque wrench (WP 0033 00, Item 44). Bend tabs on key washer.

18. Insert engine disconnect actuator (9) through hole in top of housing (10). Secure housing bracket with washer (11) and

new cotter pin (12).

19. Insert ball bearing (13) into shift collar (14). Secure with new retaining ring (15).

20. Install shift collar (14) on input shouldered shaft (16). Secure with new retaining ring (17).

21. Align splines of input shaft (16) with input gear. Install input shaft with shift collar (14) aligned with actuator (9).

0019 00-16